高交流电压小电压实验报告仪（耐焊弧实验报告仪）-（统计机把控好）

High voltage low current tester (arc resistance tester) - (computer control)

產各称称：耐电弧试验机

Product name: electric arc resistance tester

企业产品参数：NDH-A

Product model: NDH - A

考虑规则：GB/T 1411-2002《固态物耐压的原材料耐高低平功率电弧充放电充放电的做实验的时候》（一样IEC  61621-1997）及ASTM D495等标淮的标准设计生产制造的，并包含IEC 149、UL 746A等疲劳试验技巧

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

最主要选用范围内及基本功能：

本现场实验机是通过技术应广泛用于电机马达、物品和水取暖器物品等服务业的电焊工用塑胶板材、树酯胶和隔绝漆等隔绝的原原材料的耐弧光特性划分，主广泛用于固态垃圾隔绝的原原材料如：塑胶板材、薄膜和珍珠棉、树酯、黑云母、卫浴陶瓷、波璃、隔绝油、隔绝漆、硬纸板等导电介质的耐弧光特性测验；

本研究英文报告室检测机由算起机控住工作，会表明到现阶段研究英文报告情况及研究英文报告时，研究英文报告结束了后并导出到现阶段研究英文报告数据文件，并可打印机.标准研究统计。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 远程服务器为左右两成一体构成，下边为操作方法模式，顶部为现场实验箱。

2 本货品用于*新智能化调整高技术，经由抉择软件（IEC或ASTM）可自主做出应力测试，并在网吧我的电脑屏幕上显示实验设计操作过程和但是。

3 **使用性能积极，抗影响能力素质强，测试仪误差高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电弧焊接通断时段误差度：超过 ±10ms

2 调压器出水量：2kVA

3 固定测试线电压：12.5kV

4 实验设计线电压要求：±3%

5 电流量掌握精度等级：±10%  直流电估测高精准度：1.5%

6 工业对岩样有压力：（0.5±0.05）N

7 金属电极材质：钨棒

8 电极材料距里：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 采用氛围体温：（23±2）℃

10 动用条件绝对湿度：（50±5）%

11 交流电源：220V±5%  50Hz  10A

12 校正    最简单的方法：   新国标/美标/10 mA 反复/20 mA 间断/30 mA多次/40 mA连继

13 做实验的时候程度正确：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 货品具体型号：

NDH-A    耐电弧焊接校正仪-微机调整

NDH-B    耐电弧焊接实验设计仪-触模屏操作

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！